Enabling technologies for agriculture 4.0 in the supply chain aiming to reduce waste
DOI:
https://doi.org/10.5585/exactaep.2022.21415Keywords:
agriculture 4.0, lean management, waste, supply chain, industry 4.0Abstract
The aim of this study was to identify Industry 4.0 technologies that are being used in the agricultural supply chain to reduce losses. A Systematic Literature Review was carried out and, in its methodology, the authors, inspired by the 7 Lean wastes, raised the wastes found in the literature as well as the Industry 4.0 technologies, using the Scopus (Elsevier) database. The PRISMA protocol was used to screen the papers, and the Mendeley and SciMAT software assisted in the analysis of the selected documents. The analysis of 12 studies indicates that the most cited Lean wastes, between the years of 2011 and 2021, were processing losses, poor management of resources and energy, defective products, transportation, inventory, misinformation of stakeholders and lack of transparency and traceability of products in the supply chain. Still, the technologies pointed out for the mitigation of these setbacks were simulation, sensors, decision support tools and risk analysis and blockchain.
Downloads
References
Albiero, D., Paulo, R. L. D., Junior, J. C. F., Santos, J. D. S. G., & Melo, R. P. (2020). Agriculture 4.0: a terminological introduction. [Article]. Revista Ciencia Agronomica, 51(5), 1-8.
Almadani, B., & Mostafa, S. M. (2021). IIoT based multimodal communication model for Agriculture and Agro-Industries. [Article]. IEEE Access.
Amjad, M. S., Rafique, M. Z., & Khan, M. A. (2021). Leveraging Optimized and Cleaner Production through Industry 4.0. [Article]. Sustainable Production and Consumption, 26, 859-871.
Barbosa, M. W. (2021). Uncovering research streams on agri-food supply chain management: A bibliometric study. [Article]. Global Food Security, 28.
Berruto, R., Busato, P., Bochtis, D. D., & Sørensen, C. G. (2013). Comparison of distribution systems for biogas plant residual. [Article]. Biomass and Bioenergy, 52, 139-150.
Biolchini, J., Mian, P. G., Natali, A. C. C., & Travassos, G. H. (2005). Systematic review in software engineering. System Engineering and Computer Science Department COPPE/UFRJ, Technical Report ES, 679(05), 45.
Bolfe, É. L., Jorge, L. A. C., Sanches, I. D., Júnior, A. L., Costa, C. C. D., Victoria, D. C., et al. (2020). Precision and digital agriculture: Adoption of technologies and perception of Brazilian farmers. [Article]. Agriculture (Switzerland), 10(12), 1-16.
Boobalan, P., Ramu, S. P., Pham, Q.-V., Dev, K., Pandya, S., Maddikunta, P. K. R., et al. (2022). Fusion of Federated Learning and Industrial Internet of Things: A survey. Computer Networks, 212, 109048.
Brum, M. R., & Rieder, R. (2015). Virtual Reality Applications for Smart Cities in Health: A Systematic Review. Paper presented at the 17th Symposium on Virtual and Augmented Reality, SVR 2015.
Caicedo Solano, N. E., García Llinás, G. A., Montoya-Torres, J. R., & Ramirez Polo, L. E. (2020). A planning model of crop maintenance operations inspired in lean manufacturing. [Article]. Computers and Electronics in Agriculture, 179.
Carrera, J., Fernández del Carmen, A., Fernández-Muñoz, R., Rambla, J. L., Pons, C., Jaramillo, A., et al. (2012). Fine-tuning tomato agronomic properties by computational genome redesign. [Article]. PLoS Computational Biology, 8(6).
Chapman, J., Power, A., Netzel, M. E., Sultanbawa, Y., Smyth, H. E., Truong, V. K., et al. (2020). Challenges and opportunities of the fourth revolution: a brief insight into the future of food. [Review]. Critical Reviews in Food Science and Nutrition.
Cobo, M. J., Lõpez-Herrera, A. G., Herrera-Viedma, E., & Herrera, F. (2012). SciMAT: A new science mapping analysis software tool. [Article]. Journal of the American Society for Information Science and Technology, 63(8), 1609-1630.
da Silveira, F., Lermen, F. H., & Amaral, F. G. (2021). An overview of agriculture 4.0 development: Systematic review of descriptions, technologies, barriers, advantages, and disadvantages. [Review]. Computers and Electronics in Agriculture, 189.
Dalmarco, G., Ramalho, F. R., Barros, A. C., & Soares, A. L. (2019). Providing industry 4.0 technologies: The case of a production technology cluster. [Article]. Journal of High Technology Management Research, 30(2).
Dizyee, K., Baker, D., & Rich, K. M. (2017). A quantitative value chain analysis of policy options for the beef sector in Botswana. [Article]. Agricultural Systems, 156, 13-24.
dos Reis, Â. V., Medeiros, F. A., Ferreira, M. F., Machado, R. L. T., Romano, L. N., Marini, V. K., et al. (2020). Technological trends in digital agriculture and their impact on agricultural machinery development practices. [Article]. Revista Ciencia Agronomica, 51(5), 2-12.
Filev Maia, R., Ballester Lurbe, C., Agrahari Baniya, A., & Hornbuckle, J. (2020). IRRISENS: An IoT Platform Based on Microservices Applied in Commercial-Scale Crops Working in a Multi-Cloud Environment. [Article]. Sensors (Basel, Switzerland), 20(24).
Gupta, S., & Jain, S. K. (2013). A literature review of lean manufacturing. International Journal of Management Science and Engineering Management, 8(4), 241-249.
Ikeziri, L. M., Melo, J. C., Campos, R. T., Okimura, L. I., & Junior, J. A. G. (2020). A perspectiva da indústria 4.0 sobre a filosofia de gestão Lean Manufacturing. Brazilian Journal of Development, 6(1), 1274-1289.
Jalali, M. S., Razak, S., Gordon, W., Perakslis, E., & Madnick, S. (2019). Health care and cybersecurity: Bibliometric analysis of the literature. [Review]. Journal of Medical Internet Research, 21(2).
Khan, A., & Turowski, K. (2016). A perspective on industry 4.0: From challenges to opportunities in production systems. Paper presented at the International Conference on Internet of Things and Big Data, IoTBD 2016.
Kör, B., Krawczyk, A., & Wakkee, I. (2021). Addressing food loss and waste prevention. [Article]. British Food Journal.
Leng, K., Bi, Y., Jing, L., Fu, H. C., & Van Nieuwenhuyse, I. (2018). Research on agricultural supply chain system with double chain architecture based on blockchain technology. [Article]. Future Generation Computer Systems, 86, 641-649.
Leksic, I., Stefanic, N., & Veza, I. (2020). The impact of using different lean manufacturing tools on waste reduction. Advances in Production Engineering & Management, 15(1).
Locher, D. A. (2008). Value stream mapping for lean development: a how-to guide for streamlining time to market: CRC Press.
Maheshwari, P., Singla, S., & Shastri, Y. (2017). Resiliency optimization of biomass to biofuel supply chain incorporating regional
biomass pre-processing depots. [Article]. Biomass and Bioenergy, 97, 116-131.
Makkar, H. P. S., & Costa, C. (2020). Potential blockchain applications in animal production and health sector. [Article]. CAB Reviews: Perspectives in Agriculture, Veterinary Science, Nutrition and Natural Resources, 15(35).
Manikas, I., Sundarakani, B., & John, J. V. (2017). Analysis of operational efficiency of a meat processing supply chain: A case study from the UAE. [Article]. Agricultural Economics Review, 18(2), 60-76.
McInnes, M. D. F., Moher, D., Thombs, B. D., McGrath, T. A., Bossuyt, P. M., Clifford, T., et al. (2018). Preferred reporting items for a systematic review and meta-analysis of diagnostic test accuracy studies: the PRISMA-DTA statement. Jama, 319(4), 388-396.
Moher, D., Liberati, A., Tetzlaff, J., Altman, D. G., & Prisma, G. (2009). Preferred reporting items for systematic reviews and meta-analyses: the PRISMA statement. PLoS medicine, 6(7), e1000097.
Moher, D., Shamseer, L., Clarke, M., Ghersi, D., Liberati, A., Petticrew, M., et al. (2015). Preferred reporting items for systematic review and meta-analysis protocols (PRISMA-P) 2015 statement. Systematic reviews, 4(1), 1-9.
Monteleone, S., de Moraes, E. A., de Faria, B. T., Aquino Junior, P. T., Maia, R. F., Neto, A. T., et al. (2020). Exploring the adoption of precision agriculture for irrigation in the context of agriculture 4.0: The key role of internet of things. [Article]. Sensors (Switzerland),
(24), 1-32.
Muflikh, Y. N., Smith, C., & Aziz, A. A. (2021). A systematic review of the contribution of system dynamics to value chain analysis in agricultural development. [Review]. Agricultural Systems, 189.
Persson, J. (2017). A review of the design and development processes of simulation for training in healthcare – A technology-centered versus a human-centered perspective. [Review]. Applied Ergonomics, 58, 314-326.
Petig, E., Rudi, A., Angenendt, E., Schultmann, F., & Bahrs, E. (2019). Linking a farm model and a location optimization model for evaluating energetic and material straw valorization pathways—A case study in Baden-Wuerttemberg. [Article]. GCB Bioenergy, 11(1),
-325.
Plaza, A. M., Díaz, J., & Pérez, J. (2018). Software architectures for health care cyber-physical systems: A systematic literature review. [Conference Paper]. Journal of Software: Evolution and Process, 30(7).
Ramola, M., Yadav, V., & Jain, R. (2019). On the adoption of additive manufacturing in healthcare: a literature review. [Review]. Journal of Manufacturing Technology Management, 30(1), 48-69.
Ronaghi, M. H. (2020). A blockchain maturity model in agricultural supply chain. [Review]. Information Processing in Agriculture.
Rose, D. C., Wheeler, R., Winter, M., Lobley, M., & Chivers, C. A. (2021). Agriculture 4.0: Making it work for people, production, and the
planet. [Article]. Land Use Policy, 100.
Santos, B. P., Alberto, A., Lima, T. D. F. M., & Charrua-Santos, F. M. B. (2018). Indústria 4.0: desafios e oportunidades. Revista Produção e Desenvolvimento, 4(1), 111-124.
Serazetdinova, L., Garratt, J., Baylis, A., Stergiadis, S., Collison, M., & Davis, S. (2019). How should we turn data into decisions in AgriFood? [Article]. Journal of the Science of Food and Agriculture, 99(7), 3213-3219.
Sott, M. K., Furstenau, L. B., Kipper, L. M., Giraldo, F. D., Lopez-Robles, J. R., Cobo, M. J., et al. (2020). Precision Techniques and Agriculture 4.0 Technologies to Promote Sustainability in the Coffee Sector: State of the Art, Challenges and Future Trends. [Article]. IEEE Access, 8,
-149867.
Stathers, T., Holcroft, D., Kitinoja, L., Mvumi, B. M., English, A., Omotilewa, O., et al. (2020). A scoping review of interventions for crop postharvest loss reduction in sub-Saharan Africa and South Asia. [Article]. Nature Sustainability, 3(10), 821-835.
Stewart, L. A., Clarke, M., Rovers, M., Riley, R. D., Simmonds, M., Stewart, G., et al. (2015). Preferred reporting items for a systematic review and meta-analysis of individual participant data: the PRISMA-IPD statement. Jama, 313(16), 1657-1665.
Vaz, C. R., Fagundes, A. B., Olivera, I. L., & Selig, P. M. (2011). Conceitos e metodologias para um mundo sustentável: uma reflexão da PL, P+ L e produção enxuta. Revista Gestão da Produção Operações e Sistemas(1), 83.
Vågsholm, I., Arzoomand, N. S., & Boqvist, S. (2020). Food Security, Safety, and Sustainability—Getting the Trade-Offs Right. [Review]. Frontiers in Sustainable Food Systems, 4(16).
Welfle, A., Gilbert, P., & Thornley, P. (2014). Increasing biomass resource availability through supply chain analysis. [Article]. Biomass and Bioenergy, 70, 249-266.
Womack, J. P., Jones, D. T., & Roos, D. (1992). A máquina que mudou o mundo, 14. Ed. Rio de Janeiro: Campus.
Zaccardelli, M., Roscigno, G., Pane, C., Celano, G., Di Matteo, M., Mainente, M., et al. (2021). Essential oils and quality composts sourced by recycling vegetable residues from the aromatic plant supply chain. [Article]. Industrial Crops and Products, 162.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2022 Ana Clara Hackenhaar Kellermann, Liane Mählmann Kipper, Eduardo Baldo Moraes, Pedro Leivas
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
